{"title":"Pre-Assembled Lift Kits","description":"\u003cp\u003e3RD GEN SEQUOIA\u003c\/p\u003e","products":[{"product_id":"3-4-5-lift-stage-6-suspension-system-tubular-uca-sequoia-2023","title":"3-4.5\" Lift, Stage 6 Suspension System, Tubular UCA Sequoia (2023+)","description":"\u003ch3\u003eProduct Description\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 6 complete suspension system for the 2023-2024 Toyota Sequoia builds upon the Stage 5 system with the upgrade of the 2.5 Series front coilovers to remote reservoir versions. This system offers improved on- and off-road performance, with greater front and rear shock heat dissipation, as well as improved alignment specs and increased front-end lift height range for a proper stance and fitment of up to 35\" tires. To compliment the remote reservoir coilover shock and tubular steel upper control arm combo, a sway bar drop kit for the front of the truck is included along with our dual rate coil springs and proven 2.0 nitrogen charged monotube shocks with remote reservoirs for the rear.\u003c\/p\u003e\n\u003cp\u003eThis Stage 6 system features the 2023-2024 Toyota Sequoia VS 2.5 Series remote reservoir front coilovers. These adjustable coilovers allow up to 3-4.5” of lift height adjustability over stock when using the ICON billet front upper control arms, allowing the use of larger, more aggressive wheel and tire combinations. ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock components yield the maximum travel possible (up to 40% increase over stock) along with superior ride quality and suspension performance both on- and off-road. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade.\u003c\/p\u003e\n\u003cp\u003eThe included ICON tubular upper control arm kit is designed to improve the overall performance of the 2023-2024 Toyota Sequoia with corrected front-end geometry, built in additional caster, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.\u003c\/p\u003e\n\u003cp\u003eThe included sway bar drop brackets help minimize sway bar link bind through the suspension travel range. This helps the suspension move more freely and allows for the full range of wheel travel without overstressing any OE components.\u003c\/p\u003e\n\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance. 3” of rear lift height over stock allows a for level stance front to rear.\u003c\/p\u003e\n\u003cp\u003eRounding out the Stage 6 suspension system are V.S. 2.0 Aluminum Series rear remote reservoir shocks specially tailored for the 2023-2024 Sequoia. The 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. Their pairing with the ICON 2.5 Series front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.\u003c\/p\u003e\n\u003ch3\u003eIncluded\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 2.5 VS RR COILOVER KIT\u003c\/li\u003e\n\u003cli\u003e(1) TUBULAR UCA DJ PRO KIT\u003c\/li\u003e\n\u003cli\u003e(1) SWAY BAR DROP KIT \u003c\/li\u003e\n\u003cli\u003e(1) DUAL RATE REAR SPRING KIT\u003c\/li\u003e\n\u003cli\u003e(2) 0-3\" REAR 2.0 VS RR\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Features\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle specific design for 2023-2024 Toyota Sequoia\u003c\/li\u003e\n\u003cli\u003e2.5 Series front coilovers with remote reservoirs for superior damping and vehicle control along with improved shock cooling\u003c\/li\u003e\n\u003cli\u003eAdjustable front ride heights from 3-4.5” of front lift over stock\u003c\/li\u003e\n\u003cli\u003eTubular UCAs for added strength, durability, and alignment correction for better drivability\u003c\/li\u003e\n\u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n\u003cli\u003eIncluded sway bar drop brackets reduce bind in OE sway bar links\u003c\/li\u003e\n\u003cli\u003eAllows for full wheel travel without overstressing OE components\u003c\/li\u003e\n\u003cli\u003eDual rate rear coil springs improve performance and ride quality while providing 2\" of rear lift\u003c\/li\u003e\n\u003cli\u003e2.0 Aluminum Series remote reservoir rear shocks provide balanced tune with coilovers and increased performance\u003c\/li\u003e\n\u003cli\u003eAll ICON shock absorbers are fully rebuildable and re-tunable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOEM Wheels \u0026amp; Tires Fitment: Yes\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 17x8.5\" w\/ 5.75” Backspace \/ 25mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 18x9\" w\/ 6” Backspace \/ 25mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Tires: 35\" x 12.50\" (Minor fender trimming and modifications may be required)\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #55: Shocks Are Fully Serviceable. Lift Heights Indicated Are For A Stock Equipped Vehicle.\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #85: Advertised Lift Height Ranges Are For A Stock Equipped Vehicle. Increasing Weight Of Vehicle Due To Accessories Will Alter Lift Range.\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #142: Not Compatible With Tundra\/Sequoia Equipped With Load-Leveling Rear Height Control Air Suspension.\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #149: For 4WD Models Without TRD Off-Road Package ICON Recommends Using ICON Diff Drop (Part# 55156) Or Using Toyota TRD Axles (Part# 434200C020 Driver \/ 434100C020 Pass). Failure To Do So Could Result In Front Axle Damage. Not Required For TRD Pro.\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #171: If equipped with TRD aluminum skid plate part # 55164 is also required\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: Most Sequoia submodels will have front lift height range of 3-4.5” over stock and 2\" of rear lift over stock. Submodels equipped with TRD Off-Road Package and TRD Pro will have a front lift height range of 1-2.5\" over stock and remain at stock height in the rear.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":45907033260268,"sku":"ICOK53236T","price":3982.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0636\/1330\/5068\/files\/3-4.5_Lift_Stage6SuspensionSystem_TubularUCASequoia_2023_1.jpg?v=1731698455"},{"product_id":"3-3-75-lift-stage-3-suspension-system-sequoia-2023","title":"3-3.75\" Lift, Stage 3 Suspension System Sequoia (2023+)","description":"\u003ch3\u003eProduct Description\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 3 complete suspension system for the 2023-2024 Toyota Sequoia is our most basic system that features complete ICON threaded-body V.S. 2.5 Series Coilovers in the front, providing improved on- and off-road performance as well as front-end lift and leveling for a proper stance and fitment of up to 35\" tires. This system features the innovative new 2.5\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.iconvehicledynamics.com\/exp\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cu\u003eEXP Series\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003ecoilover shocks and sway bar drop kit for the front of the truck along with dual rate coil springs and our proven 2.0 nitrogen charged monotube shocks with internal reservoirs for the rear.\u003c\/p\u003e\n\u003cp\u003eThis Stage 3 system features the 2023-2024 Toyota Sequoia VS 2.5 Series internal reservoir front coilovers. These adjustable coilovers allow up to 3-3.75” of lift height adjustability over stock when using the OE upper control arms, allowing the use of larger, more aggressive wheel and tire combinations. ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock components yield the maximum travel possible (up to 40% increase over stock) along with superior ride quality and suspension performance both on- and off-road.\u003c\/p\u003e\n\u003cp\u003eThe included sway bar drop brackets help minimize sway bar link bind through the suspension travel range. This helps the suspension move more freely and allows for the full range of wheel travel without overstressing any OE components.\u003c\/p\u003e\n\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance. 2” of rear lift height over stock allows a for level stance front to rear.\u003c\/p\u003e\n\u003cp\u003eRounding out the Stage 3 suspension system are V.S. 2.0 Aluminum Series rear shocks specially tailored for the 2023-2024 Sequoia. The 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Their pairing with the ICON 2.5 Series front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.\u003c\/p\u003e\n\u003ch3\u003eIncluded \u003cmeta charset=\"utf-8\"\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 2.5 VS IR COILOVER KIT\u003c\/li\u003e\n\u003cli\u003e(1) SWAY BAR DROP KIT\u003c\/li\u003e\n\u003cli\u003e(2) 0-3\" REAR 2.0 VS IR\u003c\/li\u003e\n\u003cli\u003e(1) 2\" DUAL RATE REAR SPRING KIT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Features\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/h3\u003e\n\u003cdiv class=\"column medium-6 details-spec-description-container\"\u003e\n\u003cdiv class=\"details-spec-description features\"\u003e\n\u003cdiv class=\"text-overflow\"\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle specific design for 2023-2024 Toyota Sequoia\u003c\/li\u003e\n\u003cli\u003e2.5 Series front coilovers with internal reservoirs for superior damping and vehicle control\u003c\/li\u003e\n\u003cli\u003eAdjustable front ride heights from 3-3.75” of front lift over stock when used with stock UCAs\u003c\/li\u003e\n\u003cli\u003eIncluded sway bar drop brackets reduce bind in OE sway bar links\u003c\/li\u003e\n\u003cli\u003eAllows for full wheel travel without overstressing OE components\u003c\/li\u003e\n\u003cli\u003eAllows for up to 40% increase in front wheel travel over stock without overstressing OE components\u003c\/li\u003e\n\u003cli\u003eDual rate rear coil springs improve performance and ride quality while providing 2\" of rear lift\u003c\/li\u003e\n\u003cli\u003e2.0 Aluminum Series rear shocks provide balanced tune with coilovers and increased performance\u003c\/li\u003e\n\u003cli\u003eAll ICON shock absorbers are fully rebuildable and re-tunable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eFitment Notes \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOEM Wheels \u0026amp; Tires Fitment: Yes\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 17x8.5\" w\/ 5.75” Backspace \/ 25mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 18x9\" w\/ 6” Backspace \/ 25mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Tires: 35\" x 12.50\" (Minor fender trimming and modifications may be required)\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #55: Shocks Are Fully Serviceable. Lift Heights Indicated Are For A Stock Equipped Vehicle.\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #85: Advertised Lift Height Ranges Are For A Stock Equipped Vehicle. Increasing Weight Of Vehicle Due To Accessories Will Alter Lift Range.\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #142: Not Compatible With Tundra\/Sequoia Equipped With Load-Leveling Rear Height Control Air Suspension.\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #148: ICON Does Not Recommend Lifting Above 2.25\" (Tundra)\/3.75\" (Sequoia) Without An ICON Upper Control Arm, Failure To Do So Can Result In Improper Wheel Alignment And Cause Damage To Front Axles On 4WD Models\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #149: For 4WD Models Without TRD Off-Road Package ICON Recommends Using ICON Diff Drop (Part# 55156) Or Using Toyota TRD Axles (Part# 434200C020 Driver \/ 434100C020 Pass). Failure To Do So Could Result In Front Axle Damage. Not Required For TRD Pro.\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #171: If equipped with TRD aluminum skid plate part # 55164 is also required\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: Most Sequoia submodels will have front lift height range of 3-3.75” over stock and 2\" of rear lift over stock. Submodels equipped with TRD Off-Road Package and TRD Pro will have a front lift height range of 1-1.75\" over stock and remain at stock height in the rear.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":45907079758060,"sku":"ICOK53233","price":2473.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0636\/1330\/5068\/files\/3-3.75_Lift_Stage3SuspensionSystemSequoia_2023.jpg?v=1731700478"},{"product_id":"3-4-5-stage-4-tubular-suspension-system-sequoia-2023","title":"3-4.5\" Stage 4 Tubular Suspension System Sequoia (2023+)","description":"\u003ch3\u003eProduct Description\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 4 complete suspension system for the 2023-2024 Toyota Sequoia builds upon the ICON threaded-body V.S. 2.5 Series Coilovers with the addition of ICON tubular front upper control arms. This system offers improved on- and off-road performance as well as improved alignment specs with front-end lift and leveling for a proper stance and fitment of up to 35\" tires. To compliment the internal reservoir coilover shock and tubular control arm combo, a sway bar drop kit for the front of the truck is included along with dual rate coil springs and our proven 2.0 nitrogen charged monotube shocks with internal reservoirs for the rear.\u003c\/p\u003e\n\u003cp\u003eThis Stage 4 system features the 2023-2024 Toyota Sequoia VS 2.5 Series internal reservoir front coilovers. These adjustable coilovers allow up to 3-4.5” of lift height adjustability over stock when using the ICON tubular steel front upper control arms, allowing the use of larger, more aggressive wheel and tire combinations. ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock components yield the maximum travel possible (up to 40% increase over stock) along with superior ride quality and suspension performance both on- and off-road.\u003c\/p\u003e\n\u003cp\u003eThe included ICON tubular upper control arm kit is designed to improve the overall performance of the 2023-2024 Toyota Sequoia with corrected front-end geometry, built in additional caster, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.\u003c\/p\u003e\n\u003cp\u003eThe included sway bar drop brackets help minimize sway bar link bind through the suspension travel range. This helps the suspension move more freely and allows for the full range of wheel travel without overstressing any OE components.\u003c\/p\u003e\n\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance. 2” of rear lift height over stock allows a for level stance front to rear.\u003c\/p\u003e\n\u003cp\u003eRounding out the Stage 4 suspension system are V.S. 2.0 Aluminum Series rear shocks specially tailored for the 2023-2024 Sequoia. The 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Their pairing with the ICON 2.5 Series front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.\u003c\/p\u003e\n\u003ch3\u003eIncluded\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 2.5 VS IR COILOVER KIT\u003c\/li\u003e\n\u003cli\u003e(1) TUBULAR UCA DJ PRO KIT\u003c\/li\u003e\n\u003cli\u003e(1) SEQUOIA SWAY BAR DROP KIT\u003c\/li\u003e\n\u003cli\u003e(2) 0-3\" REAR 2.0 VS IR\u003c\/li\u003e\n\u003cli\u003e(1) 2\" DUAL RATE REAR SPRING KIT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Features\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle specific design for 2023-2024 Toyota Sequoia\u003c\/li\u003e\n\u003cli\u003e2.5 Series front coilovers with internal reservoirs for superior damping and vehicle control\u003c\/li\u003e\n\u003cli\u003eAdjustable front ride heights from 3-4.5” of front lift over stock\u003c\/li\u003e\n\u003cli\u003eTubular UCAs for added strength, durability, and alignment correction for better drivability\u003c\/li\u003e\n\u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n\u003cli\u003eIncluded sway bar drop brackets reduce bind in OE sway bar links\u003c\/li\u003e\n\u003cli\u003eAllows for full wheel travel without overstressing OE components\u003c\/li\u003e\n\u003cli\u003eDual rate rear coil springs improve performance and ride quality while providing 2\" of rear lift\u003c\/li\u003e\n\u003cli\u003e2.0 Aluminum Series rear shocks provide balanced tune with coilovers and increased performance\u003c\/li\u003e\n\u003cli\u003eAll ICON shock absorbers are fully rebuildable and re-tunable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOEM Wheels \u0026amp; Tires Fitment: Yes\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 17x8.5\" w\/ 5.75” Backspace \/ 25mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 18x9\" w\/ 6” Backspace \/ 25mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Tires: 35\" x 12.50\" (Minor fender trimming and modifications may be required)\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #55: Shocks Are Fully Serviceable. Lift Heights Indicated Are For A Stock Equipped Vehicle.\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #85: Advertised Lift Height Ranges Are For A Stock Equipped Vehicle. Increasing Weight Of Vehicle Due To Accessories Will Alter Lift Range.\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #142: Not Compatible With Sequoia Equipped With Load-Leveling Rear Height Control Air Suspension.\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #149: For 4WD Models Without TRD Off-Road Package ICON Recommends Using ICON Diff Drop (Part# 55156) Or Using Toyota TRD Axles (Part# 434200C020 Driver \/ 434100C020 Pass). Failure To Do So Could Result In Front Axle Damage. Not Required For TRD Pro.\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #171: If equipped with TRD aluminum skid plate part # 55164 is also required\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: Most Sequoia submodels will have front lift height range of 3-4.5” over stock and 2\" of rear lift over stock. Submodels equipped with TRD Off-Road Package and TRD Pro will have a front lift height range of 1-2.5\" over stock and remain at stock height in the rear.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":45912146641132,"sku":"ICOK53234T","price":3353.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0636\/1330\/5068\/files\/3-4.5_Stage4TubularSuspensionSystemSequoia_2023.jpg?v=1731934545"},{"product_id":"3-4-5-lift-stage-5-billet-suspension-system-sequoia-2023","title":"3-4.5\" Lift, Stage 5 Billet Suspension System Sequoia (2023+)","description":"\u003ch3\u003eProduct description\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThe ICON Vehicle Dynamics Stage 5 complete suspension system for the 2023-2024 Toyota Sequoia builds upon the Stage 4 system with the upgrade of the 2.0 Aluminum Series rear shocks to remote reservoir versions. This system offers improved on- and off-road performance, with greater rear shock heat dissipation, as well as improved alignment specs and increased front-end lift height range for a proper stance and fitment of up to 35\" tires. To compliment the 2.0 remote reservoir rear shocks, dual rate rear coils, a 2.5 Series internal reservoir front coilover shock and billet front upper control arm combo is included along with a front sway bar drop kit.\u003c\/p\u003e\n\u003cp\u003eThis Stage 5 system features the 2023-2024 Toyota Sequoia VS 2.5 Series internal reservoir front coilovers. These adjustable coilovers allow up to 3-4.5” of lift height adjustability over stock when using the ICON billet aluminum front upper control arms, allowing the use of larger, more aggressive wheel and tire combinations. ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock components yield the maximum travel possible (up to 40% increase over stock) along with superior ride quality and suspension performance both on- and off-road.\u003c\/p\u003e\n\u003cp\u003eThe included ICON billet aluminum upper control arm kit is designed to improve the overall performance of the 2023-2024 Toyota Sequoia with corrected front-end geometry, increased on-vehicle camber and caster adjustment, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.\u003c\/p\u003e\n\u003cp\u003eThe included sway bar drop brackets help minimize sway bar link bind through the suspension travel range. This helps the suspension move more freely and allows for the full range of wheel travel without overstressing any OE components.\u003c\/p\u003e\n\u003cp\u003eThe dual-rate rear coil design provides a softer ride height spring rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance. 3” of rear lift height over stock allows a for level stance front to rear.\u003c\/p\u003e\n\u003cp\u003eRounding out the Stage 5 suspension system are V.S. 2.0 Aluminum Series rear remote reservoir shocks specially tailored for the 2023-2024 Sequoia. The 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. Their pairing with the ICON 2.5 Series front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.\u003c\/p\u003e\n\u003ch3\u003eIncluded\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 2.5 VS IR COILOVER KIT\u003c\/li\u003e\n\u003cli\u003e(1) BILLET UCA DJ PRO KIT\u003c\/li\u003e\n\u003cli\u003e(1) SWAY BAR DROP KIT\u003c\/li\u003e\n\u003cli\u003e(2) 0-3\" REAR 2.0 VS RR\u003c\/li\u003e\n\u003cli\u003e(1) 2\" DUAL RATE REAR SPRING KIT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle specific design for 2023-2024 Toyota Sequoia\u003c\/li\u003e\n\u003cli\u003e2.5 Series front coilovers with internal reservoirs for superior damping and vehicle control\u003c\/li\u003e\n\u003cli\u003eAdjustable front ride heights from 3-4.5” of front lift over stock\u003c\/li\u003e\n\u003cli\u003eBillet aluminum UCAs for added strength, durability, and on-vehicle caster\/camber adjustment for optimum drivability\u003c\/li\u003e\n\u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation\u003c\/li\u003e\n\u003cli\u003eIncluded sway bar drop brackets reduce bind in OE sway bar links\u003c\/li\u003e\n\u003cli\u003eAllows for full wheel travel without overstressing OE components\u003c\/li\u003e\n\u003cli\u003eDual rate rear coil springs improve performance and ride quality while providing 2\" of rear lift\u003c\/li\u003e\n\u003cli\u003e2.0 Aluminum Series remote reservoir rear shocks provide balanced tune with coilovers and increased performance\u003c\/li\u003e\n\u003cli\u003eAll ICON shock absorbers are fully rebuildable and re-tunable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOEM Wheels \u0026amp; Tires Fitment: Yes\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 17x8.5\" w\/ 5.75” Backspace \/ 25mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 18x9\" w\/ 6” Backspace \/ 25mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Tires: 35\" x 12.50\" (Minor fender trimming and modifications may be required)\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #55: Shocks Are Fully Serviceable. Lift Heights Indicated Are For A Stock Equipped Vehicle.\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #85: Advertised Lift Height Ranges Are For A Stock Equipped Vehicle. Increasing Weight Of Vehicle Due To Accessories Will Alter Lift Range.\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #142: Not Compatible With Sequoia Equipped With Load-Leveling Rear Height Control Air Suspension.\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #149: For 4WD Models Without TRD Off-Road Package ICON Recommends Using ICON Diff Drop (Part# 55156) Or Using Toyota TRD Axles (Part# 434200C020 Driver \/ 434100C020 Pass). Failure To Do So Could Result In Front Axle Damage. Not Required For TRD Pro.\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #171: If equipped with TRD aluminum skid plate part # 55164 is also required\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: Most Sequoia submodels will have front lift height range of 3-4.5” over stock and 2\" of rear lift over stock. Submodels equipped with TRD Off-Road Package and TRD Pro will have a front lift height range of 1-2.5\" over stock and remain at stock height in the rear.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ICON","offers":[{"title":"Default Title","offer_id":45912161222892,"sku":"ICOK53235","price":4133.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0636\/1330\/5068\/files\/3-4.5_Lift_Stage5BilletSuspensionSystemSequoia_2023_1.jpg?v=1731935539"},{"product_id":"3-25-pro-truck-stage-2-lift-kit-sequoia-2023","title":"3.25\" Pro Truck Stage 2 Lift Kit Sequoia (2023+)","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe Eibach Pro-Truck-Lift Stage 2 kit for the 2023+ Toyota Sequoia provides a +1.4\" to +3.25\" front lift and a +1.2\" rear lift. It features adjustable threaded coilovers, rear sport shocks, and off-road race springs for improved ride height and performance. Built with anodized aluminum mounts, a monotube design, and nitrogen-filled valving, this system is engineered for durability and control.\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"note\"\u003eListed front height is with Eibach spring on bottom clip of Eibach Sport shocks\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDoes not fit Vehicles equipped with Adaptive Variable Suspension (AVS)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDoes not fit vehicles with Load-Leveling Rear Height Control Air Suspension Listed\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch3\u003eProduct Features\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStage 2 system featuring Pro-Truck-Coilover 2.0's + Rear Sport Shocks\u003c\/li\u003e\n\u003cli\u003eFront Adjustable Threaded Spring Perch to Accommodate Increased Loads and Maximum Clearance. ERO Off-Road Race Spring Equipped and Compatible.\u003c\/li\u003e\n\u003cli\u003eAnodized 6061-T6 Billet Aluminum Coilover Mounts, 46mm Piston, Monotube Design with Nitrogen Filled Variable Force Valving.\u003c\/li\u003e\n\u003cli\u003eIndividually Dyno Tested for Matched Performance and Reliability. Heavy Duty Bushing System also Cycle Tested.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":46306331197676,"sku":"EIBE86-82-099-01-22","price":1565.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0636\/1330\/5068\/files\/eibach-e86821050122-tacoma4g-1_c9be234b-3fe5-4030-8b7b-766d2fbf94d8.jpg?v=1743167379"},{"product_id":"3-25-pro-truck-stage-2r-lift-kit-sequoia-2023","title":"3.25\" Pro Truck Stage 2R Lift Kit Sequoia (2023+)","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe Eibach Pro-Truck-Lift Stage 2R for the 2023+ Toyota Sequoia provides a +1.4\" to +3.25\" front lift and a +1.2\" rear lift, enhancing off-road performance. It includes height-adjustable front coilovers, rear reservoir shocks, and rear springs for improved ride control and durability. Featuring anodized aluminum mounts, a monotube design, and nitrogen-filled valving, this kit is dyno-tested for reliability.\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"note\"\u003eListed front height is with Eibach spring on bottom clip of Eibach Sport shocks\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDoes not fit Vehicles equipped with Adaptive Variable Suspension (AVS)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDoes not fit vehicles with Load-Leveling Rear Height Control Air Suspension Listed\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch3\u003eProduct Features\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStage 2 system featuring Pro-Truck-Coilover 2.0's + Pro-Truck Reservoir Sport Shocks + Pro-Lift-Kit Springs\u003c\/li\u003e\n\u003cli\u003eHeight Adjustable Front Coilover and External Reservoir Rear Shocks for Increased Off-Road Performance\u003c\/li\u003e\n\u003cli\u003eAnodized 6061-T6 Billet Aluminum Coilover Mounts, 46mm Piston, Monotube Design with Nitrogen Filled Variable Force Valving.\u003c\/li\u003e\n\u003cli\u003eIndividually Dyno Tested for Matched Performance and Reliability. Heavy Duty Bushing System also Cycle Tested.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":46306366030060,"sku":"EIBE86-82-099-02-22","price":1799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0636\/1330\/5068\/files\/eibach-e86821050222-tacoma4g-1_8dd27af6-9e9d-4d4b-afe7-c9c989409074.jpg?v=1743167503"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0636\/1330\/5068\/collections\/3g_Sequoia_-_Desktop_Category_Header._5e8ae5d1-ba0a-498a-a17d-b05fb7bb84a2.jpg?v=1750260062","url":"https:\/\/yotaxpedition.com\/collections\/pre-assembled-lift-kits-3g-sequoia.oembed","provider":"Yota Xpedition LLC","version":"1.0","type":"link"}