Extreme Amber LED Turn Signal / DRL Kit 4Runner (2014-2024)

Product Description

Added Visibility The Amber Extreme DRL is the most advanced LED turn signal system on the market. The unique design allows you to add a bright amber daytime running light or a safe functioning output if your car or truck uses the turn signal as the DRL. The issue with most plug-in style LED bulbs is that the output in DRL mode is not very bright, or they run too hot, overheat, and fail. Error-free bulbs generally use a thermally regulated output circuit, which reduces current to save the bulb from burning up. The problem with the design is that the current is lower, which triggers the flasher to double the flash rate because it thinks the bulb has burnt out.

Solution The Extreme DRL solves all of these issues due to the smart circuitry built into the controller and superior thermal management. No scenario will create a failure from overheating or reduced load, triggering hyperflash. When the parking lights or DRLs are on, the output is reduced to a safe but very bright 700LM. When the turn signal is applied, the output doubles to 1400LM and draws just under 2A of current, which does not trigger hyperflash. The optional dimming wire triggers the output to the equivalent of a standard parking light.

Radial Lens As if the Extreme wasn't extreme enough, we decided to kick it up a notch. The original lens is not terrible by any means; we just saw an opportunity for even more output and ran with it. The ultimate goal when developing an LED replacement is to simulate the characteristics of the filament bulb. Not only does the Extreme have insane lumen levels, but all that power has been harnessed to fire perfectly in the lamp housing reflector. Combined with the two-position adjustable feature, this produces an intensity like no other LED on the market.

The Original For years, we have been innovating and pioneering the industry with products like the V3 and V6 systems. We've been there, done that, and have experience in designing a system that not only has the kinks worked out but performs better than anything else on the market. When quality comes into question, know you can trust VLEDS.

Fitment Notes

• Fits Toyota 4Runner (2014-2024)
• Only fits front turn signal location

Included

• 2X - V6 Extreme Amber DRL Bulb
• 2X -V6 Extreme DRL Controller
• 2X - Adjustment Spacer
• 2X - V6 Base Adapter
• 2X - Single Pin Wire + Solo Tap (Dim Parking Output)
• 2X - Sealing Gasket
• 2X - Adhesive Lined Heat Shrink
• 2X - Dielectric Grease Pack
• 2X - Collar
• 2X - Allen Key
• 2X - 8 Screw

Product Features

• High-output driver with the best components available.
• 12X highest bin rating 2525 chips.
• 70LM Parking 900LM DRL 1400LM Turn - measured output per bulb
• The low parking or DRL circuit shuts off when the turn signal is applied for a more defined notification.
• Integrated HDRL controller senses DRL input and switches the output to 900LM.
• Dim amber option for parking light output with headlights on.
• 5X brighter than stock.
• Current Draw 2A @ 14.4V 27W
• No resistors required

Coverage and duration

VLEDS warrants that it will provide a free replacement for any VLEDS product that fails or proves defective during the warranty period on the vehicle for which it was originally installed. This warranty does not apply to a VLEDS product that has been altered, misused, damaged, installed improperly, or installed on a vehicle for which it was not designed. On commercial/fleet vehicles, all VLEDS products are covered for up to 1/2 of the standard warranty period. Additional conditions may apply to certain part applications; if they do, they are clearly stated on the product page description. This warranty is extended only to the owner of the vehicle on which the VLEDS product was installed, while that person owns the vehicle, and is not transferable.

Remedy and service

Before issuing a warranty replacement, the customer must troubleshoot and diagnose defective components by swapping components from side to side. VLEDS will validate the information provided and the alleged defect.

If the product fails within 30 days of receipt, you can convert your warranty to store credit for the total value of the product. Outside of 30 days, we will only replace products – no refunds are given unless we do not carry replacement parts.

Warranty replacement parts are shipped via USPS First Class Mail at the expense of VLEDS. If you need your replacement quickly, an upcharge payment link for FedEx 2Day will be provided in your warranty email.

International

Customers must pay a portion of the shipping charge for all warranty replacements. The payment link and amount for the charge will be included in your warranty email.
Exclusions

VLEDS makes no warranties of merchantability or fitness for a particular use or purpose and no other warranties, representations, or guarantees, whether written or oral, beyond those contained in this warranty. The replacement of the unit is the sole and exclusive remedy for claims of any type (including personal injury) arising from the failure or defective condition of the VLEDS product, from VLEDS negligence or breach of legal duty, or otherwise. VLEDS will not reimburse the vehicle owner for removing or returning the failed or defective unit, installing the replacement unit, replacing any other parts, or for any other expenses, charges, or damages.

Limitation on liability

To the extent allowed by law, VLEDS will have no obligation to the vehicle owner for any incidental or consequential damages arising from the failure or defective condition of the VLEDS product, from VLEDS negligence or breach of legal duty, or otherwise. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.