DRL / High Beam Upgrade Kit 4Runner (2014-2021)

Product Description

No Flicker DRL Designed specifically for the 5th Gen 14-21 4Runner *W/Halogen High Beam/DRLs. After years of development, we have addressed and solved the issue of flickering LEDs in DRL mode! Not only did we fix the flicker, but we also maintained a fully functional high-output high beam. Our system is the first Dual-Output, High-Performance LED DRL/High Beam for Toyota and Lexus vehicles with a Pulse Width Modulated (PWM) DRL system.

How it Works When a PWM input is detected by the switcher's smart voltage sensing circuitry, the output voltage is then controlled at a set parameter to the V35 bulb to get the perfect output for DRL use. 

Real-World Testing The DRL output level was crucial. We performed extensive on-road testing to find the perfect lumen figure. It's not too bright during overcast days or dusk and not too dim in direct sunlight. So many products on the market are either too dim, and you lose your high beams, or they are too bright, running at full output, and blind oncoming traffic.

Beam Pattern The ultra-thin 1.5mm Copper Core PCB provides a near back-to-back mounting surface for the HP 3570 chips, resulting in a more controlled beam pattern. When combined with the increased output, you'll be able to see farther than ever before.

Easy to Install With just a few connections and a little wire routing, you'll have the kit installed in no time. We have provided detailed instructions on how to install it (see the instructions tab). Everything you need is included in the kit to get that professionally installed look.

Fitment Notes

• Fits Toyota 4Runner 2014-2021
• Not compatible with 2021-2023 models with factory LED headlights

Included

• 2X - V35 Monochrome Series DRL Bulbs
• 2X - PWM DRL Switcher
• 1X - Power Harness
• 1X- 5A Fuse Holder
• 2X - M6 Bolts
• 1X - 15 ft 1/4" Split Loom
• 6X - 6" Zip Ties

Product Features

• Unoffensive 400LM DRL / 3500LM High Beam output.
• No flicker DRL
• Ultra-thin, 1.5mm copper core PCB for optimal light output and a focused, crisp beam pattern.
• HP 3570 chipset with higher output and less heat. Dedicated thermal pad for direct transfer from chip to PCB.
• Dual square copper heat pipes significantly increase contact surface area, enhancing efficiency in thermal management: enhanced conductivity and superior thermal efficiency with a copper-plated internal heat sink.
• 12000 RPM Whisper Flo fan with a near-silent 55 dB operation.
• Over-molded wiring effectively isolates electrical components from the elements, leaving no base types or connections overlooked.
• Chrome-plated stem virtually disappears inside the housing, blending perfectly with the factory reflector.

Coverage and duration

VLEDS warrants that it will provide a free replacement for any VLEDS product that fails or proves defective during the warranty period on the vehicle for which it was originally installed. This warranty does not apply to a VLEDS product that has been altered, misused, damaged, installed improperly, or installed on a vehicle for which it was not designed. On commercial/fleet vehicles, all VLEDS products are covered for up to 1/2 of the standard warranty period. Additional conditions may apply to certain part applications; if they do, they are clearly stated on the product page description. This warranty is extended only to the owner of the vehicle on which the VLEDS product was installed, while that person owns the vehicle, and is not transferable.

Remedy and service

Before issuing a warranty replacement, the customer must troubleshoot and diagnose defective components by swapping components from side to side. VLEDS will validate the information provided and the alleged defect.

If the product fails within 30 days of receipt, you can convert your warranty to store credit for the total value of the product. Outside of 30 days, we will only replace products – no refunds are given unless we do not carry replacement parts.

Warranty replacement parts are shipped via USPS First Class Mail at the expense of VLEDS. If you need your replacement quickly, an upcharge payment link for FedEx 2Day will be provided in your warranty email.

International

Customers must pay a portion of the shipping charge for all warranty replacements. The payment link and amount for the charge will be included in your warranty email.
Exclusions

VLEDS makes no warranties of merchantability or fitness for a particular use or purpose and no other warranties, representations, or guarantees, whether written or oral, beyond those contained in this warranty. The replacement of the unit is the sole and exclusive remedy for claims of any type (including personal injury) arising from the failure or defective condition of the VLEDS product, from VLEDS negligence or breach of legal duty, or otherwise. VLEDS will not reimburse the vehicle owner for removing or returning the failed or defective unit, installing the replacement unit, replacing any other parts, or for any other expenses, charges, or damages.

Limitation on liability

To the extent allowed by law, VLEDS will have no obligation to the vehicle owner for any incidental or consequential damages arising from the failure or defective condition of the VLEDS product, from VLEDS negligence or breach of legal duty, or otherwise. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.